WHO Digital Documentation of COVID-19 Certificates (DDCC)
1.0.1 - release
This page is part of the WHO Digital Documentation of COVID-19 Certificates (DDCC) (v1.0.1: releases Draft) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions
Active as of 2024-12-18 |
Definitions for the DDCCSubmissionSet resource profile.
Guidance on how to interpret the contents of this table can be found here
0. List | |
2. List.subject | |
Control | 1..? |
Type | Reference(DDCC Patient) |
4. List.subject.reference | |
Control | 1..? |
Must Support | true |
6. List.entry | |
8. List.entry.item | |
Type | Reference(DDCC Document Reference, DDCC Folder) |
Guidance on how to interpret the contents of this table can be found here
0. List | |
Definition | A list is a curated collection of resources. |
Short | A list is a curated collection of resources |
Control | 0..* |
Is Modifier | false |
Summary | false |
Alternate Names | Collection, WorkingList, Organizer |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) lst-1: A list can only have an emptyReason if it is empty ( emptyReason.empty() or entry.empty() )lst-2: The deleted flag can only be used if the mode of the list is "changes" ( mode = 'changes' or entry.deleted.empty() )lst-3: An entry date can only be used if the mode of the list is "working" ( mode = 'working' or entry.date.empty() )lst-1: A list can only have an emptyReason if it is empty (emptyReason.empty() or entry.empty()) lst-2: The deleted flag can only be used if the mode of the list is "changes" (mode = 'changes' or entry.deleted.empty()) lst-3: An entry date can only be used if the mode of the list is "working" (mode = 'working' or entry.date.empty()) |
2. List.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. List.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 10..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on List.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
6. List.extension:designationType | |
Slice Name | designationType |
Definition | Expresses contentType of submissionSet or the codeList of a Folder. Usually expressed in LOINC or SNOMED. |
Short | Clinical code of the List |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(Clinical code of the List) (Extension Type: CodeableConcept) |
Is Modifier | false |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
8. List.extension:sourceId | |
Slice Name | sourceId |
Definition | The globally unique, immutable, identifier of the entity that contributed the SubmissionSet. When a broker is involved in sending SubmissionSets from a collection of client systems, it shall use a different sourceId for submissions from each separate system to allow for tracking. The format of the identifier is an OID. |
Short | Publisher organization identity of the SubmissionSet |
Control | 1..1 |
Type | Extension(Publisher organization identity of the SubmissionSet) (Extension Type: Identifier) |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
10. List.extension:intendedRecipient | |
Slice Name | intendedRecipient |
Definition | holds the identity of the organization or person the SubmissionSet is intended. For XDR and eMail (e.g. Direct) this tends to be a Practitioner or Patient with a telecom holding an email, but this is not strictly required. |
Short | Intended recipient of the SubmissionSet |
Control | 0..* |
Type | Extension(Intended recipient of the SubmissionSet) (Extension Type: Reference(Practitioner, Organization, Patient, RelatedPerson, Group, Device, Location)) |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
12. List.modifierExtension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | ExtensionExtensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
14. List.identifier | |
Definition | Identifier for the List assigned for business purposes outside the context of FHIR. |
Short | Business identifier |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on List.identifier . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
16. List.identifier:uniqueId | |
Slice Name | uniqueId |
Definition | An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. Identifier for the List assigned for business purposes outside the context of FHIR. |
Short | An identifier intended for computationBusiness identifier |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1* This element is affected by the following invariants: ele-1 |
Type | Identifier(uniqueId Identifier for SubmissionSet) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. List.identifier:entryUUID | |
Slice Name | entryUUID |
Definition | An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. Identifier for the List assigned for business purposes outside the context of FHIR. |
Short | An identifier intended for computationBusiness identifier |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Identifier(entryUUID Identifier) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. List.status | |
Definition | Indicates the current state of this list. |
Short | current | retired | entered-in-error |
Comments | This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. |
Control | 1..1 |
Binding | The codes SHALL be taken from ListStatushttp://hl7.org/fhir/ValueSet/list-status|4.0.1 (required to http://hl7.org/fhir/ValueSet/list-status|4.0.1 )The current state of the list. |
Type | code |
Is Modifier | true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Pattern Value | current |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. List.mode | |
Definition | How this list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted. |
Short | working | snapshot | changes |
Comments | This element is labeled as a modifier because a change list must not be misunderstood as a complete list. |
Control | 1..1 |
Binding | The codes SHALL be taken from ListModehttp://hl7.org/fhir/ValueSet/list-mode|4.0.1 (required to http://hl7.org/fhir/ValueSet/list-mode|4.0.1 )The processing mode that applies to this list. |
Type | code |
Is Modifier | true because If set to "changes", the list is considered incomplete, while the other two codes indicate the list is complete, which changes the understanding of the elements listed |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Lists are used in various ways, and it must be known in what way it is safe to use them. |
Pattern Value | working |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
24. List.code | |
Definition | This code defines the purpose of the list - why it was created. |
Short | What the purpose of this list is |
Comments | If there is no code, the purpose of the list is implied where it is used, such as in a document section using Document.section.code. |
Control | 10..1 |
Binding | The codes SHALL be taken from For example codes, see MHD List Types ValueSethttp://hl7.org/fhir/ValueSet/list-example-codes (required to https://profiles.ihe.net/ITI/MHD/ValueSet/MHDlistTypesVS ) |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Requirements | Lists often contain subsets of resources rather than an exhaustive list. The code identifies what type of subset is included. |
Pattern Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
26. List.subject | |
Definition | The common subject (or patient) of the resources that are in the list if there is one. |
Short | If all resources have the same subject |
Comments | Some purely arbitrary lists do not have a common subject, so this is optional. |
Control | 10..1 |
Type | Reference(DDCC Patient, Patient, Group, Device, Location) |
Is Modifier | false |
Must Support | true |
Summary | true |
Requirements | The primary purpose of listing the subject explicitly is to help with finding the right list. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
28. List.subject.reference | |
Definition | A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. |
Short | Literal reference, Relative, internal or absolute URL |
Comments | Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. |
Control | 10..1 This element is affected by the following invariants: ref-1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
30. List.encounter | |
Definition | The encounter that is the context in which this list was created. |
Short | Context in which list created |
Control | 0..01 |
Type | Reference(Encounter) |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
32. List.date | |
Definition | The date that the list was prepared. |
Short | When the list was prepared |
Comments | The actual important date is the date of currency of the resources that were summarized, but it is usually assumed that these are current when the preparation occurs. |
Control | 10..1 |
Type | dateTime |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Requirements | Identifies how current the list is which affects relevance. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
34. List.source | |
Definition | The entity responsible for deciding what the contents of the list were. Where the list was created by a human, this is the same as the author of the list. |
Short | Who and/or what defined the list contents (aka Author) |
Comments | The primary source is the entity that made the decisions what items are in the list. This may be software or user. |
Control | 0..1 |
Type | Reference(Practitioner, PractitionerRole, Patient, Device) |
Is Modifier | false |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Summary | true |
Requirements | Allows follow-up as well as context. |
Alternate Names | Author |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
36. List.source.extension:authorOrg | |
Slice Name | authorOrg |
Definition | When the author of the SubmissionSet is an Organization, this extension shall be used. |
Short | Author organization of the SubmissionSet |
Control | 0..1 |
Type | Extension(Author organization of the SubmissionSet) (Extension Type: Reference(Organization)) |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
38. List.orderedBy | |
Definition | What order applies to the items in the list. |
Short | What order the list has |
Comments | Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order. |
Control | 0..01 |
Binding | The codes SHOULD be taken from ListOrderCodeshttp://hl7.org/fhir/ValueSet/list-order (preferred to http://hl7.org/fhir/ValueSet/list-order )What order applies to the items in a list. |
Type | CodeableConcept |
Is Modifier | false |
Summary | false |
Requirements | Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
40. List.note | |
Definition | Comments that apply to the overall list. |
Short | Comments about the list |
Control | 0..1* |
Type | Annotation |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
42. List.emptyReason | |
Definition | If the list is empty, why the list is empty. |
Short | Why list is empty |
Comments | The various reasons for an empty list make a significant interpretation to its interpretation. Note that this code is for use when the entire list has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases. |
Control | 0..01 This element is affected by the following invariants: lst-1 |
Binding | The codes SHOULD be taken from ListEmptyReasonshttp://hl7.org/fhir/ValueSet/list-empty-reason (preferred to http://hl7.org/fhir/ValueSet/list-empty-reason )If a list is empty, why it is empty. |
Type | CodeableConcept |
Is Modifier | false |
Summary | false |
Requirements | Allows capturing things like "none exist" or "not asked" which can be important for most lists. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. List | |||||
Definition | A list is a curated collection of resources. | ||||
Short | A list is a curated collection of resources | ||||
Control | 0..* | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | Collection, WorkingList, Organizer | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() )lst-1: A list can only have an emptyReason if it is empty ( emptyReason.empty() or entry.empty() )lst-2: The deleted flag can only be used if the mode of the list is "changes" ( mode = 'changes' or entry.deleted.empty() )lst-3: An entry date can only be used if the mode of the list is "working" ( mode = 'working' or entry.date.empty() ) | ||||
2. List.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Summary | true | ||||
4. List.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. List.meta.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
8. List.meta.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on List.meta.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
10. List.meta.versionId | |||||
Definition | The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted. | ||||
Short | Version specific identifier | ||||
Comments | The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
12. List.meta.lastUpdated | |||||
Definition | When the resource last changed - e.g. when the version changed. | ||||
Short | When the resource version last changed | ||||
Comments | This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction. | ||||
Control | 0..1 | ||||
Type | instant | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
14. List.meta.source | |||||
Definition | A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc. | ||||
Short | Identifies where the resource comes from | ||||
Comments | In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used. This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
16. List.meta.profile | |||||
Definition | A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url. | ||||
Short | Profiles this resource claims to conform to | ||||
Comments | It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set. | ||||
Control | 0..* | ||||
Type | canonical(StructureDefinition) | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
18. List.meta.security | |||||
Definition | Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure. | ||||
Short | Security Labels applied to this resource | ||||
Comments | The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored. | ||||
Control | 0..* | ||||
Binding | Unless not suitable, these codes SHALL be taken from All Security Labels (extensible to http://hl7.org/fhir/ValueSet/security-labels )Security Labels from the Healthcare Privacy and Security Classification System. | ||||
Type | Coding | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
20. List.meta.tag | |||||
Definition | Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource. | ||||
Short | Tags applied to this resource | ||||
Comments | The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored. | ||||
Control | 0..* | ||||
Binding | For example codes, see CommonTags (example to http://hl7.org/fhir/ValueSet/common-tags )Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones". | ||||
Type | Coding | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
22. List.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
24. List.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
26. List.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Short | Text summary of the resource, for human interpretation | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
28. List.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Short | Contained, inline Resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
30. List.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 1..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on List.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
32. List.extension:designationType | |||||
Slice Name | designationType | ||||
Definition | Expresses contentType of submissionSet or the codeList of a Folder. Usually expressed in LOINC or SNOMED. | ||||
Short | Clinical code of the List | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Clinical code of the List) (Extension Type: CodeableConcept) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
34. List.extension:sourceId | |||||
Slice Name | sourceId | ||||
Definition | The globally unique, immutable, identifier of the entity that contributed the SubmissionSet. When a broker is involved in sending SubmissionSets from a collection of client systems, it shall use a different sourceId for submissions from each separate system to allow for tracking. The format of the identifier is an OID. | ||||
Short | Publisher organization identity of the SubmissionSet | ||||
Control | 1..1 | ||||
Type | Extension(Publisher organization identity of the SubmissionSet) (Extension Type: Identifier) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
36. List.extension:intendedRecipient | |||||
Slice Name | intendedRecipient | ||||
Definition | holds the identity of the organization or person the SubmissionSet is intended. For XDR and eMail (e.g. Direct) this tends to be a Practitioner or Patient with a telecom holding an email, but this is not strictly required. | ||||
Short | Intended recipient of the SubmissionSet | ||||
Control | 0..* | ||||
Type | Extension(Intended recipient of the SubmissionSet) (Extension Type: Reference(Practitioner, Organization, Patient, RelatedPerson, Group, Device, Location)) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
38. List.modifierExtension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
40. List.identifier | |||||
Definition | Identifier for the List assigned for business purposes outside the context of FHIR. | ||||
Short | Business identifier | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
Slicing | This element introduces a set of slices on List.identifier . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
42. List.identifier:uniqueId | |||||
Slice Name | uniqueId | ||||
Definition | An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. | ||||
Short | An identifier intended for computation | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Identifier(uniqueId Identifier for SubmissionSet) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
44. List.identifier:entryUUID | |||||
Slice Name | entryUUID | ||||
Definition | An identifier - identifies some entity uniquely and unambiguously. Typically this is used for business identifiers. | ||||
Short | An identifier intended for computation | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Identifier(entryUUID Identifier) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
46. List.status | |||||
Definition | Indicates the current state of this list. | ||||
Short | current | retired | entered-in-error | ||||
Comments | This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from ListStatus (required to http://hl7.org/fhir/ValueSet/list-status|4.0.1 )The current state of the list. | ||||
Type | code | ||||
Is Modifier | true because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Pattern Value | current | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
48. List.mode | |||||
Definition | How this list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted. | ||||
Short | working | snapshot | changes | ||||
Comments | This element is labeled as a modifier because a change list must not be misunderstood as a complete list. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from ListMode (required to http://hl7.org/fhir/ValueSet/list-mode|4.0.1 )The processing mode that applies to this list. | ||||
Type | code | ||||
Is Modifier | true because If set to "changes", the list is considered incomplete, while the other two codes indicate the list is complete, which changes the understanding of the elements listed | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Lists are used in various ways, and it must be known in what way it is safe to use them. | ||||
Pattern Value | working | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
50. List.title | |||||
Definition | A label for the list assigned by the author. | ||||
Short | Descriptive name for the list | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Allows customization beyond just the code identifying the kind of list. | ||||
Example | <br/><b>General</b>:Dr. Jane's Patients | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
52. List.code | |||||
Definition | This code defines the purpose of the list - why it was created. | ||||
Short | What the purpose of this list is | ||||
Comments | If there is no code, the purpose of the list is implied where it is used, such as in a document section using Document.section.code. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from MHD List Types ValueSet (required to https://profiles.ihe.net/ITI/MHD/ValueSet/MHDlistTypesVS ) | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Lists often contain subsets of resources rather than an exhaustive list. The code identifies what type of subset is included. | ||||
Pattern Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
54. List.subject | |||||
Definition | The common subject (or patient) of the resources that are in the list if there is one. | ||||
Short | If all resources have the same subject | ||||
Comments | Some purely arbitrary lists do not have a common subject, so this is optional. | ||||
Control | 1..1 | ||||
Type | Reference(DDCC Patient) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | The primary purpose of listing the subject explicitly is to help with finding the right list. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
56. List.subject.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
58. List.subject.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on List.subject.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
60. List.subject.reference | |||||
Definition | A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. | ||||
Short | Literal reference, Relative, internal or absolute URL | ||||
Comments | Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. | ||||
Control | 1..1 This element is affected by the following invariants: ref-1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
62. List.subject.type | |||||
Definition | The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). | ||||
Short | Type the reference refers to (e.g. "Patient") | ||||
Comments | This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. | ||||
Control | 0..1 | ||||
Binding | Unless not suitable, these codes SHALL be taken from ResourceType (extensible to http://hl7.org/fhir/ValueSet/resource-types )Aa resource (or, for logical models, the URI of the logical model). | ||||
Type | uri | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
64. List.subject.identifier | |||||
Definition | An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. | ||||
Short | Logical reference, when literal reference is not known | ||||
Comments | When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
66. List.subject.display | |||||
Definition | Plain text narrative that identifies the resource in addition to the resource reference. | ||||
Short | Text alternative for the resource | ||||
Comments | This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
68. List.encounter | |||||
Definition | The encounter that is the context in which this list was created. | ||||
Short | Context in which list created | ||||
Control | 0..0 | ||||
Type | Reference(Encounter) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
70. List.date | |||||
Definition | The date that the list was prepared. | ||||
Short | When the list was prepared | ||||
Comments | The actual important date is the date of currency of the resources that were summarized, but it is usually assumed that these are current when the preparation occurs. | ||||
Control | 1..1 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Identifies how current the list is which affects relevance. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
72. List.source | |||||
Definition | The entity responsible for deciding what the contents of the list were. Where the list was created by a human, this is the same as the author of the list. | ||||
Short | Who and/or what defined the list contents (aka Author) | ||||
Comments | The primary source is the entity that made the decisions what items are in the list. This may be software or user. | ||||
Control | 0..1 | ||||
Type | Reference(Practitioner, PractitionerRole, Patient, Device) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Summary | true | ||||
Requirements | Allows follow-up as well as context. | ||||
Alternate Names | Author | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
74. List.source.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
76. List.source.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on List.source.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
78. List.source.extension:authorOrg | |||||
Slice Name | authorOrg | ||||
Definition | When the author of the SubmissionSet is an Organization, this extension shall be used. | ||||
Short | Author organization of the SubmissionSet | ||||
Control | 0..1 | ||||
Type | Extension(Author organization of the SubmissionSet) (Extension Type: Reference(Organization)) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
80. List.source.reference | |||||
Definition | A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. | ||||
Short | Literal reference, Relative, internal or absolute URL | ||||
Comments | Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server. | ||||
Control | 0..1 This element is affected by the following invariants: ref-1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
82. List.source.type | |||||
Definition | The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent. The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources). | ||||
Short | Type the reference refers to (e.g. "Patient") | ||||
Comments | This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified. | ||||
Control | 0..1 | ||||
Binding | Unless not suitable, these codes SHALL be taken from ResourceType (extensible to http://hl7.org/fhir/ValueSet/resource-types )Aa resource (or, for logical models, the URI of the logical model). | ||||
Type | uri | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
84. List.source.identifier | |||||
Definition | An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. | ||||
Short | Logical reference, when literal reference is not known | ||||
Comments | When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it. Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any). | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
86. List.source.display | |||||
Definition | Plain text narrative that identifies the resource in addition to the resource reference. | ||||
Short | Text alternative for the resource | ||||
Comments | This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
88. List.orderedBy | |||||
Definition | What order applies to the items in the list. | ||||
Short | What order the list has | ||||
Comments | Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order. | ||||
Control | 0..0 | ||||
Binding | The codes SHOULD be taken from ListOrderCodes (preferred to http://hl7.org/fhir/ValueSet/list-order )What order applies to the items in a list. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
90. List.note | |||||
Definition | Comments that apply to the overall list. | ||||
Short | Comments about the list | ||||
Control | 0..1 | ||||
Type | Annotation | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
92. List.entry | |||||
Definition | Entries in this list. | ||||
Short | Entries in the list | ||||
Comments | If there are no entries in the list, an emptyReason SHOULD be provided. | ||||
Control | 0..* This element is affected by the following invariants: lst-1 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
94. List.entry.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
96. List.entry.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
98. List.entry.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
100. List.entry.flag | |||||
Definition | The flag allows the system constructing the list to indicate the role and significance of the item in the list. | ||||
Short | Status/Workflow information about this item | ||||
Comments | The flag can only be understood in the context of the List.code. If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Deleted can only be used if the List.mode is "changes". | ||||
Control | 0..0 | ||||
Binding | For example codes, see PatientMedicineChangeTypes (example to http://hl7.org/fhir/ValueSet/list-item-flag )Codes that provide further information about the reason and meaning of the item in the list. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | This field is present to support various clinical uses of lists, such as a discharge summary medication list, where flags specify whether the medication was added, modified, or deleted from the list. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
102. List.entry.deleted | |||||
Definition | True if this item is marked as deleted in the list. | ||||
Short | If this item is actually marked as deleted | ||||
Comments | If the flag means that the entry has actually been deleted from the list, the deleted element SHALL be true. Both flag and deleted can only be used if the List.mode is "changes". A deleted entry should be displayed in narrative as deleted. This element is labeled as a modifier because it indicates that an item is (to be) no longer in the list. | ||||
Control | 0..0 This element is affected by the following invariants: lst-2 | ||||
Type | boolean | ||||
Is Modifier | true because If deleted is true, then the item included in the list isn't actually part of the list anymore | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | The flag element may contain codes that an application processing the list does not understand. However there can be no ambiguity if a list item is actually marked as "deleted". | ||||
Meaning if Missing | List items are generally only treated as deleted when this element explicitly carries a value of true. Systems SHOULD always populate this value when mode is 'changes' | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
104. List.entry.date | |||||
Definition | When this item was added to the list. | ||||
Short | When item added to list | ||||
Control | 0..0 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | The date may be significant for understanding the meaning of items in a working list. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
106. List.entry.item | |||||
Definition | A reference to the actual resource from which data was derived. | ||||
Short | Actual entry | ||||
Control | 1..1 | ||||
Type | Reference(DDCC Document Reference, DDCC Folder) | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
108. List.emptyReason | |||||
Definition | If the list is empty, why the list is empty. | ||||
Short | Why list is empty | ||||
Comments | The various reasons for an empty list make a significant interpretation to its interpretation. Note that this code is for use when the entire list has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases. | ||||
Control | 0..0 This element is affected by the following invariants: lst-1 | ||||
Binding | The codes SHOULD be taken from ListEmptyReasons (preferred to http://hl7.org/fhir/ValueSet/list-empty-reason )If a list is empty, why it is empty. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Allows capturing things like "none exist" or "not asked" which can be important for most lists. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |