SMART ICVP
0.1.0 - ci-build

This page is part of the ICVP (v0.1.0: Releases Draft) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: DVCImmunization - Detailed Descriptions

Draft as of 2024-10-07

Definitions for the DVC-ImmunizationUvIps resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Immunization
2. Immunization.vaccineCode
BindingThe codes SHALL be taken from DVC - Vaccines
(required to http://smart.who.int/icvp/ValueSet/DVCVaccines)
4. Immunization.occurrence[x]
TypedateTime, string
[x] NoteSeeChoice of Data Typesfor further information about how to use [x]
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
LabelDate of vaccination
6. Immunization.lotNumber
Must Supporttrue
LabelVaccine batch number
8. Immunization.performer
10. Immunization.performer.actor
TypeReference(mCSD Practitioner, mCSD Organization for Jurisdictions)
LabelHealth worker identifier
12. Immunization.protocolApplied
Control1..?
Must Supporttrue
SlicingThis element introduces a set of slices on Immunization.protocolApplied. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • type @ authority
  • 14. Immunization.protocolApplied:protocolAppliedAuthority
    Slice NameprotocolAppliedAuthority
    Control1..*
    Must Supporttrue
    16. Immunization.protocolApplied:protocolAppliedAuthority.authority
    TypeReference(mCSD Organization for Jurisdictions)
    18. Immunization.protocolApplied:protocolAppliedAuthority.targetDisease
    BindingThe codes SHOULD be taken from Disease Targeted
    (preferred to http://smart.who.int/icvp/ValueSet/DiseaseTargeted)
    LabelDisease or agent targeted
    20. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x]
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Must Supporttrue
    22. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x].extension
    Control1..?
    24. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x].extension:doseNumberCodeableConcept
    Slice NamedoseNumberCodeableConcept
    Control1..1
    TypeExtension(doseNumberCodeableConcept) (Extension Type: CodeableConcept)

    Guidance on how to interpret the contents of this table can be found here

    0. Immunization
    Definition

    Describes the event of a patient being administered a vaccination or a record of a vaccination as reported by a patient, a clinician or another party and may include vaccine reaction information and what vaccination protocol was followed


    Describes the event of a patient being administered a vaccine or a record of an immunization as reported by a patient, a clinician or another party.

    ShortImmunization event information
    Control0..*
    Is Modifierfalse
    Summaryfalse
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    2. Immunization.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. Immunization.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    6. Immunization.status
    Definition

    Indicates the current status of the immunization event.

    Shortcompleted | entered-in-error | not-done
    Comments

    Will generally be set to show that the immunization has been completed or not done. This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

    Control1..1
    BindingThe codes SHALL be taken from ImmunizationStatusCodeshttp://hl7.org/fhir/ValueSet/immunization-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/immunization-status|4.0.1)

    A set of codes indicating the current status of an Immunization.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains statuses entered-in-error and not-done which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. Immunization.vaccineCode
    Definition

    Vaccine that was administered or was to be administered. Several kinds of vaccine product coding could be provided. The IPS assumes that either the type of the vaccine for particular disease or diseases (e.g. MMR vaccine) against which the patient has been immunized is provided; or the known absent / unknown.

    Other coded information can be provided as well as:

    • The IDMP Pharmaceutical Product Identifier (PhPID), Level 1, [Substance(s)]. Example: Amoxicillin and Clavulanate Potassium; or any other equivalent coded concept.
    • The IDMP Pharmaceutical Product Identifier (PhPID), Level 2 [Substance(s) + Strength + reference strength]. Example: Amoxicillin 875 mg and Clavulanate Potassium 125 mg; or any other equivalent coded concept.
    • The IDMP Pharmaceutical Product Identifier (PhPID), Level 3 [Substance(s) + administrable dose form]. Example: Amoxicillin and Clavulanate Potassium, Oral Tablet; or any other equivalent coded concept.
    • The IDMP Pharmaceutical Product Identifier (PhPID), Level 4 [Substance(s) + strength + reference strength + administrable dose form]. Example: Amoxicillin 875 mg and clavulanate potassium 125 mg, oral tablet; or any other equivalent coded concept.
    • The IDMP Medicinal Product Identifier (MPID) or any equivalent Medicinal Product Identifier. IDMP MPID uniquely identifies a Medicinal Product, reflecting (but not replacing) any other authorization numbers allocated by a regulator. MPID implies one (set of) PhPID. The MPID shall use a common segment pattern related to a Medicinal Product, which, when each segment is valued shall define a specific MPID concept.
    • The IDMP Packaged Medicinal Product Identifier (PCID) or any equivalent Packaged Medicinal Product Identifier. Uniquely identifies a Medicinal Product based on its packaging. This implies one MPID can be associated with more than one PCID, if the same Medicinal Product has more than one type of package.
    • Any other kind of code that that identifies, classifies or clusters the administered product (e.g. the medicinal product or the product class).

    The value sets used for the PhPID, MPID and PCID identifiers are provisional and include only few equivalent concepts used for exemplification purposes, they will be updated with real IDMP identifiers when they will become available.


    Vaccine that was administered or was to be administered.

    ShortVaccine that was administered or was to be administered.Several kinds of vaccine product coding could be provided. The IPS assumes that either the type of the vaccine for particular disease or diseases (e.g. MMR vaccine) against which the patient has been immunised is provided; or the known absent / unknown code. Other coded information can be provided as well as: the IDMP Pharmaceutical Product Identifiers (PhPID), Medicinal Product Identifier (MPID), Packaged Medicinal Product Identifier (PCID), when available, or equivalent coded concepts; the WHO ATC codes; or any other kind of code that that identifies, classifies or cluster the administered product.Vaccine product administered
    Comments

    Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

    Control1..1
    This element is affected by the following invariants: ele-1
    BindingThe codes SHALL be taken from For example codes, see DVC - Vaccineshttp://hl7.org/fhir/ValueSet/vaccine-code
    (required to http://smart.who.int/icvp/ValueSet/DVCVaccines)
    TypeCodeableConcept(Codeable Concept (IPS))
    Is Modifierfalse
    Must Supporttrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    10. Immunization.patient
    Definition

    The patient who either received or did not receive the immunization.

    ShortWho was immunized
    Control1..1
    TypeReference(Patient (IPS), Patient)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. Immunization.patient.reference
    Definition

    A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

    ShortLiteral reference, Relative, internal or absolute URL
    Comments

    Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

    Control10..1
    This element is affected by the following invariants: ref-1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    14. Immunization.occurrence[x]
    Definition

    Date vaccine administered or was to be administered.

    ShortVaccine administration date
    Comments

    When immunizations are given a specific date and time should always be known. When immunizations are patient reported, a specific date might not be known. Although partial dates are allowed, an adult patient might not be able to recall the year a childhood immunization was given. An exact date is always preferable, but the use of the String data type is acceptable when an exact date is not known. A small number of vaccines (e.g. live oral typhoid vaccine) are given as a series of patient self-administered dose over a span of time. In cases like this, often, only the first dose (typically a provider supervised dose) is recorded with the occurrence indicating the date/time of the first dose.

    Control1..1
    TypedateTime, string
    [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    LabelDate of vaccination
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    16. Immunization.occurrence[x].extension:data-absent-reason
    Slice Namedata-absent-reason
    Definition

    Provides a reason why the occurrence is missing.

    Shortoccurrence[x] absence reason
    Control0..1
    TypeExtension(Data Absent Reason) (Extension Type: code)
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Immunization.lotNumber
    Definition

    Lot number of the vaccine product.

    ShortVaccine lot number
    Control0..1
    Typestring
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summaryfalse
    LabelVaccine batch number
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    20. Immunization.isSubpotent
    Definition

    Indication if a dose is considered to be subpotent. By default, a dose should be considered to be potent.

    ShortDose potency
    Comments

    Typically, the recognition of the dose being sub-potent is retrospective, after the administration (ex. notification of a manufacturer recall after administration). However, in the case of a partial administration (the patient moves unexpectedly and only some of the dose is actually administered), subpotency may be recognized immediately, but it is still important to record the event.

    Control0..1
    Typeboolean
    Is Modifiertrue because This element is labeled as a modifier because an immunization event with a subpotent vaccine doesn't protect the patient the same way as a potent dose.
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Meaning if MissingBy default, a dose should be considered to be potent.
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    22. Immunization.protocolApplied
    Definition

    The protocol (set of recommendations) being followed by the provider who administered the dose.

    ShortProtocol followed by the provider
    Control10..*
    TypeBackboneElement
    Is Modifierfalse
    Must Supporttrue
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on Immunization.protocolApplied. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • type @ authority
    • 24. Immunization.protocolApplied.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      26. Immunization.protocolApplied.doseNumber[x]
      Definition

      Nominal position in a series.

      ShortDose number within series
      Comments

      The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).

      Control1..1
      TypeChoice of: positiveInt, string
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. Immunization.protocolApplied:protocolAppliedAuthority
      Slice NameprotocolAppliedAuthority
      Definition

      The protocol (set of recommendations) being followed by the provider who administered the dose.

      ShortProtocol followed by the provider
      Control10..*
      TypeBackboneElement
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      30. Immunization.protocolApplied:protocolAppliedAuthority.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      32. Immunization.protocolApplied:protocolAppliedAuthority.authority
      Definition

      Indicates the authority who published the protocol (e.g. ACIP) that is being followed.

      ShortWho is responsible for publishing the recommendations
      Control0..1
      TypeReference(mCSD Organization for Jurisdictions, Organization)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      34. Immunization.protocolApplied:protocolAppliedAuthority.targetDisease
      Definition

      The particular disease against which the patient has been immunized.

      Additional conformance bindings provided for use for this element in specific (jurisdictional or other) contexts include (these bindings are represented in the StructureDefinition as instances of the elementdefinition-additionalBinding extension):


      The vaccine preventable disease the dose is being administered against.

      ShortVaccine preventable disease being targetedVaccine preventatable disease being targetted
      Control0..*
      BindingThe codes SHOULD be taken from For example codes, see Disease Targetedhttp://hl7.org/fhir/ValueSet/immunization-target-disease
      (preferred to http://smart.who.int/icvp/ValueSet/DiseaseTargeted)
      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      LabelDisease or agent targeted
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      36. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x]
      Definition

      Nominal position in a series.

      ShortDose number within series
      Comments

      The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).

      Control1..1
      TypeChoice of: positiveInt, string
      [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Must Support TypesNo must-support rules about the choice of types/profiles
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      38. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x].extension
      Definition

      An Extension


      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortExtensionAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control10..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on Immunization.protocolApplied.doseNumber[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 40. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x].extension:doseNumberCodeableConcept
        Slice NamedoseNumberCodeableConcept
        Definition

        doseNumber

        ShortExtension
        Control1..1
        TypeExtension(doseNumberCodeableConcept) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

        Guidance on how to interpret the contents of this table can be found here

        0. Immunization
        Definition

        Describes the event of a patient being administered a vaccination or a record of a vaccination as reported by a patient, a clinician or another party and may include vaccine reaction information and what vaccination protocol was followed

        ShortImmunization event information
        Control0..*
        Is Modifierfalse
        Summaryfalse
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        2. Immunization.id
        Definition

        The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

        ShortLogical id of this artifact
        Comments

        The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

        Control0..1
        Typeid
        Is Modifierfalse
        Summarytrue
        4. Immunization.meta
        Definition

        The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

        ShortMetadata about the resource
        Control0..1
        TypeMeta
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        6. Immunization.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Immunization.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Immunization.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Immunization.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        14. Immunization.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        16. Immunization.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. Immunization.identifier
        Definition

        A unique identifier assigned to this immunization record.

        ShortBusiness identifier
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. Immunization.status
        Definition

        Indicates the current status of the immunization event.

        Shortcompleted | entered-in-error | not-done
        Comments

        Will generally be set to show that the immunization has been completed or not done. This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.

        Control1..1
        BindingThe codes SHALL be taken from ImmunizationStatusCodes
        (required to http://hl7.org/fhir/ValueSet/immunization-status|4.0.1)

        A set of codes indicating the current status of an Immunization.

        Typecode
        Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains statuses entered-in-error and not-done which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. Immunization.statusReason
        Definition

        Indicates the reason the immunization event was not performed.

        ShortReason not done
        Comments

        This is generally only used for the status of "not-done". The reason for performing the immunization event is captured in reasonCode, not here.

        Control0..1
        BindingFor example codes, see ImmunizationStatusReasonCodes
        (example to http://hl7.org/fhir/ValueSet/immunization-status-reason)

        The reason why a vaccine was not administered.

        TypeCodeableConcept
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. Immunization.vaccineCode
        Definition

        Vaccine that was administered or was to be administered. Several kinds of vaccine product coding could be provided. The IPS assumes that either the type of the vaccine for particular disease or diseases (e.g. MMR vaccine) against which the patient has been immunized is provided; or the known absent / unknown.

        Other coded information can be provided as well as:

        • The IDMP Pharmaceutical Product Identifier (PhPID), Level 1, [Substance(s)]. Example: Amoxicillin and Clavulanate Potassium; or any other equivalent coded concept.
        • The IDMP Pharmaceutical Product Identifier (PhPID), Level 2 [Substance(s) + Strength + reference strength]. Example: Amoxicillin 875 mg and Clavulanate Potassium 125 mg; or any other equivalent coded concept.
        • The IDMP Pharmaceutical Product Identifier (PhPID), Level 3 [Substance(s) + administrable dose form]. Example: Amoxicillin and Clavulanate Potassium, Oral Tablet; or any other equivalent coded concept.
        • The IDMP Pharmaceutical Product Identifier (PhPID), Level 4 [Substance(s) + strength + reference strength + administrable dose form]. Example: Amoxicillin 875 mg and clavulanate potassium 125 mg, oral tablet; or any other equivalent coded concept.
        • The IDMP Medicinal Product Identifier (MPID) or any equivalent Medicinal Product Identifier. IDMP MPID uniquely identifies a Medicinal Product, reflecting (but not replacing) any other authorization numbers allocated by a regulator. MPID implies one (set of) PhPID. The MPID shall use a common segment pattern related to a Medicinal Product, which, when each segment is valued shall define a specific MPID concept.
        • The IDMP Packaged Medicinal Product Identifier (PCID) or any equivalent Packaged Medicinal Product Identifier. Uniquely identifies a Medicinal Product based on its packaging. This implies one MPID can be associated with more than one PCID, if the same Medicinal Product has more than one type of package.
        • Any other kind of code that that identifies, classifies or clusters the administered product (e.g. the medicinal product or the product class).

        The value sets used for the PhPID, MPID and PCID identifiers are provisional and include only few equivalent concepts used for exemplification purposes, they will be updated with real IDMP identifiers when they will become available.

        ShortVaccine that was administered or was to be administered.Several kinds of vaccine product coding could be provided. The IPS assumes that either the type of the vaccine for particular disease or diseases (e.g. MMR vaccine) against which the patient has been immunised is provided; or the known absent / unknown code. Other coded information can be provided as well as: the IDMP Pharmaceutical Product Identifiers (PhPID), Medicinal Product Identifier (MPID), Packaged Medicinal Product Identifier (PCID), when available, or equivalent coded concepts; the WHO ATC codes; or any other kind of code that that identifies, classifies or cluster the administered product.
        Comments

        Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

        Control1..1
        This element is affected by the following invariants: ele-1
        BindingThe codes SHALL be taken from DVC - Vaccines
        (required to http://smart.who.int/icvp/ValueSet/DVCVaccines)
        TypeCodeableConcept(Codeable Concept (IPS))
        Is Modifierfalse
        Must Supporttrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. Immunization.patient
        Definition

        The patient who either received or did not receive the immunization.

        ShortWho was immunized
        Control1..1
        TypeReference(Patient (IPS))
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. Immunization.patient.id
        Definition

        Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

        ShortUnique id for inter-element referencing
        Control0..1
        Typestring
        Is Modifierfalse
        XML FormatIn the XML format, this property is represented as an attribute.
        Summaryfalse
        30. Immunization.patient.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Immunization.patient.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 32. Immunization.patient.reference
          Definition

          A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

          ShortLiteral reference, Relative, internal or absolute URL
          Comments

          Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

          Control1..1
          This element is affected by the following invariants: ref-1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          34. Immunization.patient.type
          Definition

          The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

          The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

          ShortType the reference refers to (e.g. "Patient")
          Comments

          This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

          Control0..1
          BindingUnless not suitable, these codes SHALL be taken from ResourceType
          (extensible to http://hl7.org/fhir/ValueSet/resource-types)

          Aa resource (or, for logical models, the URI of the logical model).

          Typeuri
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          36. Immunization.patient.identifier
          Definition

          An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

          ShortLogical reference, when literal reference is not known
          Comments

          When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

          When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

          Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

          Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

          NoteThis is a business identifier, not a resource identifier (see discussion)
          Control0..1
          TypeIdentifier
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          38. Immunization.patient.display
          Definition

          Plain text narrative that identifies the resource in addition to the resource reference.

          ShortText alternative for the resource
          Comments

          This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. Immunization.encounter
          Definition

          The visit or admission or other contact between patient and health care provider the immunization was performed as part of.

          ShortEncounter immunization was part of
          Control0..1
          TypeReference(Encounter)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          42. Immunization.occurrence[x]
          Definition

          Date vaccine administered or was to be administered.

          ShortVaccine administration date
          Comments

          When immunizations are given a specific date and time should always be known. When immunizations are patient reported, a specific date might not be known. Although partial dates are allowed, an adult patient might not be able to recall the year a childhood immunization was given. An exact date is always preferable, but the use of the String data type is acceptable when an exact date is not known. A small number of vaccines (e.g. live oral typhoid vaccine) are given as a series of patient self-administered dose over a span of time. In cases like this, often, only the first dose (typically a provider supervised dose) is recorded with the occurrence indicating the date/time of the first dose.

          Control1..1
          TypedateTime
          [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          LabelDate of vaccination
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. Immunization.occurrence[x].id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          46. Immunization.occurrence[x].extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Immunization.occurrence[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 48. Immunization.occurrence[x].extension:data-absent-reason
            Slice Namedata-absent-reason
            Definition

            Provides a reason why the occurrence is missing.

            Shortoccurrence[x] absence reason
            Control0..1
            TypeExtension(Data Absent Reason) (Extension Type: code)
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            50. Immunization.recorded
            Definition

            The date the occurrence of the immunization was first captured in the record - potentially significantly after the occurrence of the event.

            ShortWhen the immunization was first captured in the subject's record
            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            52. Immunization.primarySource
            Definition

            An indication that the content of the record is based on information from the person who administered the vaccine. This reflects the context under which the data was originally recorded.

            ShortIndicates context the data was recorded in
            Comments

            Reflects the “reliability” of the content.

            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            54. Immunization.reportOrigin
            Definition

            The source of the data when the report of the immunization event is not based on information from the person who administered the vaccine.

            ShortIndicates the source of a secondarily reported record
            Comments

            Should not be populated if primarySource = True, not required even if primarySource = False.

            Control0..1
            BindingFor example codes, see ImmunizationOriginCodes
            (example to http://hl7.org/fhir/ValueSet/immunization-origin)

            The source of the data for a record which is not from a primary source.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            56. Immunization.location
            Definition

            The service delivery location where the vaccine administration occurred.

            ShortWhere immunization occurred
            Control0..1
            TypeReference(Location)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            58. Immunization.manufacturer
            Definition

            Name of vaccine manufacturer.

            ShortVaccine manufacturer
            Control0..1
            TypeReference(Organization)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            60. Immunization.lotNumber
            Definition

            Lot number of the vaccine product.

            ShortVaccine lot number
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summaryfalse
            LabelVaccine batch number
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            62. Immunization.expirationDate
            Definition

            Date vaccine batch expires.

            ShortVaccine expiration date
            Control0..1
            Typedate
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            64. Immunization.site
            Definition

            A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

            ShortConcept - reference to a terminology or just text
            Comments

            Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

            Control0..1
            This element is affected by the following invariants: ele-1
            BindingThe codes SHOULD be taken from SNOMEDCTBodyStructures
            (preferred to http://hl7.org/fhir/ValueSet/body-site)
            TypeCodeableConcept(Codeable Concept (IPS))
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            66. Immunization.route
            Definition

            A concept that may be defined by a formal reference to a terminology or ontology or may be provided by text.

            ShortConcept - reference to a terminology or just text
            Comments

            Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.

            Control0..1
            This element is affected by the following invariants: ele-1
            BindingThe codes SHOULD be taken from Medicine Route of Administration - IPS
            (preferred to http://hl7.org/fhir/uv/ips/ValueSet/medicine-route-of-administration)
            TypeCodeableConcept(Codeable Concept (IPS))
            Is Modifierfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            68. Immunization.doseQuantity
            Definition

            The quantity of vaccine product that was administered.

            ShortAmount of vaccine administered
            Control0..1
            TypeQuantity(SimpleQuantity)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            70. Immunization.performer
            Definition

            Indicates who performed the immunization event.

            ShortWho performed event
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            72. Immunization.performer.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            74. Immunization.performer.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            76. Immunization.performer.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            78. Immunization.performer.function
            Definition

            Describes the type of performance (e.g. ordering provider, administering provider, etc.).

            ShortWhat type of performance was done
            Control0..1
            BindingUnless not suitable, these codes SHALL be taken from ImmunizationFunctionCodes
            (extensible to http://hl7.org/fhir/ValueSet/immunization-function)

            The role a practitioner or organization plays in the immunization event.

            TypeCodeableConcept
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            80. Immunization.performer.actor
            Definition

            The practitioner or organization who performed the action.

            ShortIndividual or organization who was performing
            Comments

            When the individual practitioner who performed the action is known, it is best to send.

            Control1..1
            TypeReference(mCSD Practitioner, mCSD Organization for Jurisdictions)
            Is Modifierfalse
            Summarytrue
            LabelHealth worker identifier
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            82. Immunization.note
            Definition

            Extra information about the immunization that is not conveyed by the other attributes.

            ShortAdditional immunization notes
            Control0..*
            TypeAnnotation
            Is Modifierfalse
            Summarytrue
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            84. Immunization.reasonCode
            Definition

            Reasons why the vaccine was administered.

            ShortWhy immunization occurred
            Control0..*
            BindingFor example codes, see ImmunizationReasonCodes
            (example to http://hl7.org/fhir/ValueSet/immunization-reason)

            The reason why a vaccine was administered.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            86. Immunization.reasonReference
            Definition

            Condition, Observation or DiagnosticReport that supports why the immunization was administered.

            ShortWhy immunization occurred
            Control0..*
            TypeReference(Condition, Observation, DiagnosticReport)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            88. Immunization.isSubpotent
            Definition

            Indication if a dose is considered to be subpotent. By default, a dose should be considered to be potent.

            ShortDose potency
            Comments

            Typically, the recognition of the dose being sub-potent is retrospective, after the administration (ex. notification of a manufacturer recall after administration). However, in the case of a partial administration (the patient moves unexpectedly and only some of the dose is actually administered), subpotency may be recognized immediately, but it is still important to record the event.

            Control0..1
            Typeboolean
            Is Modifiertrue because This element is labeled as a modifier because an immunization event with a subpotent vaccine doesn't protect the patient the same way as a potent dose.
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summarytrue
            Meaning if MissingBy default, a dose should be considered to be potent.
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            90. Immunization.subpotentReason
            Definition

            Reason why a dose is considered to be subpotent.

            ShortReason for being subpotent
            Control0..*
            BindingFor example codes, see ImmunizationSubpotentReason
            (example to http://hl7.org/fhir/ValueSet/immunization-subpotent-reason)

            The reason why a dose is considered to be subpotent.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            92. Immunization.education
            Definition

            Educational material presented to the patient (or guardian) at the time of vaccine administration.

            ShortEducational material presented to patient
            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            imm-1: One of documentType or reference SHALL be present (documentType.exists() or reference.exists())
            94. Immunization.education.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            96. Immunization.education.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            98. Immunization.education.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            100. Immunization.education.documentType
            Definition

            Identifier of the material presented to the patient.

            ShortEducational material document identifier
            Control0..1
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            102. Immunization.education.reference
            Definition

            Reference pointer to the educational material given to the patient if the information was on line.

            ShortEducational material reference pointer
            Control0..1
            Typeuri
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            104. Immunization.education.publicationDate
            Definition

            Date the educational material was published.

            ShortEducational material publication date
            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            106. Immunization.education.presentationDate
            Definition

            Date the educational material was given to the patient.

            ShortEducational material presentation date
            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            108. Immunization.programEligibility
            Definition

            Indicates a patient's eligibility for a funding program.

            ShortPatient eligibility for a vaccination program
            Control0..*
            BindingFor example codes, see ImmunizationProgramEligibility
            (example to http://hl7.org/fhir/ValueSet/immunization-program-eligibility)

            The patient's eligibility for a vaccation program.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            110. Immunization.fundingSource
            Definition

            Indicates the source of the vaccine actually administered. This may be different than the patient eligibility (e.g. the patient may be eligible for a publically purchased vaccine but due to inventory issues, vaccine purchased with private funds was actually administered).

            ShortFunding source for the vaccine
            Control0..1
            BindingFor example codes, see ImmunizationFundingSource
            (example to http://hl7.org/fhir/ValueSet/immunization-funding-source)

            The source of funding used to purchase the vaccine administered.

            TypeCodeableConcept
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            112. Immunization.reaction
            Definition

            Categorical data indicating that an adverse event is associated in time to an immunization.

            ShortDetails of a reaction that follows immunization
            Comments

            A reaction may be an indication of an allergy or intolerance and, if this is determined to be the case, it should be recorded as a new AllergyIntolerance resource instance as most systems will not query against past Immunization.reaction elements.

            Control0..*
            TypeBackboneElement
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            114. Immunization.reaction.id
            Definition

            Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

            ShortUnique id for inter-element referencing
            Control0..1
            Typestring
            Is Modifierfalse
            XML FormatIn the XML format, this property is represented as an attribute.
            Summaryfalse
            116. Immunization.reaction.extension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            118. Immunization.reaction.modifierExtension
            Definition

            May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

            Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

            ShortExtensions that cannot be ignored even if unrecognized
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
            Summarytrue
            Requirements

            Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

            Alternate Namesextensions, user content, modifiers
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            120. Immunization.reaction.date
            Definition

            Date of reaction to the immunization.

            ShortWhen reaction started
            Control0..1
            TypedateTime
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            122. Immunization.reaction.detail
            Definition

            Details of the reaction.

            ShortAdditional information on reaction
            Control0..1
            TypeReference(Observation)
            Is Modifierfalse
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            124. Immunization.reaction.reported
            Definition

            Self-reported indicator.

            ShortIndicates self-reported reaction
            Control0..1
            Typeboolean
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            126. Immunization.protocolApplied
            Definition

            The protocol (set of recommendations) being followed by the provider who administered the dose.

            ShortProtocol followed by the provider
            Control1..*
            TypeBackboneElement
            Is Modifierfalse
            Must Supporttrue
            Summaryfalse
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            SlicingThis element introduces a set of slices on Immunization.protocolApplied. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • type @ authority
            • 128. Immunization.protocolApplied.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              130. Immunization.protocolApplied.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              132. Immunization.protocolApplied.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              134. Immunization.protocolApplied.series
              Definition

              One possible path to achieve presumed immunity against a disease - within the context of an authority.

              ShortName of vaccine series
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              136. Immunization.protocolApplied.authority
              Definition

              Indicates the authority who published the protocol (e.g. ACIP) that is being followed.

              ShortWho is responsible for publishing the recommendations
              Control0..1
              TypeReference(Organization)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              138. Immunization.protocolApplied.targetDisease
              Definition

              The particular disease against which the patient has been immunized.

              Additional conformance bindings provided for use for this element in specific (jurisdictional or other) contexts include (these bindings are represented in the StructureDefinition as instances of the elementdefinition-additionalBinding extension):

              ShortVaccine preventable disease being targeted
              Control0..*
              BindingThe codes SHOULD be taken from Vaccine Target Diseases - IPS
              (preferred to http://hl7.org/fhir/uv/ips/ValueSet/target-diseases-uv-ips)

              The particular disease or diseases against which the patient has been immunized.

              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              140. Immunization.protocolApplied.doseNumber[x]
              Definition

              Nominal position in a series.

              ShortDose number within series
              Comments

              The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).

              Control1..1
              TypeChoice of: positiveInt, string
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              142. Immunization.protocolApplied.seriesDoses[x]
              Definition

              The recommended number of doses to achieve immunity.

              ShortRecommended number of doses for immunity
              Comments

              The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).

              Control0..1
              TypeChoice of: positiveInt, string
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              144. Immunization.protocolApplied:protocolAppliedAuthority
              Slice NameprotocolAppliedAuthority
              Definition

              The protocol (set of recommendations) being followed by the provider who administered the dose.

              ShortProtocol followed by the provider
              Control1..*
              TypeBackboneElement
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              146. Immunization.protocolApplied:protocolAppliedAuthority.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              148. Immunization.protocolApplied:protocolAppliedAuthority.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              150. Immunization.protocolApplied:protocolAppliedAuthority.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              152. Immunization.protocolApplied:protocolAppliedAuthority.series
              Definition

              One possible path to achieve presumed immunity against a disease - within the context of an authority.

              ShortName of vaccine series
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              154. Immunization.protocolApplied:protocolAppliedAuthority.authority
              Definition

              Indicates the authority who published the protocol (e.g. ACIP) that is being followed.

              ShortWho is responsible for publishing the recommendations
              Control0..1
              TypeReference(mCSD Organization for Jurisdictions)
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              156. Immunization.protocolApplied:protocolAppliedAuthority.targetDisease
              Definition

              The particular disease against which the patient has been immunized.

              Additional conformance bindings provided for use for this element in specific (jurisdictional or other) contexts include (these bindings are represented in the StructureDefinition as instances of the elementdefinition-additionalBinding extension):

              ShortVaccine preventable disease being targeted
              Control0..*
              BindingThe codes SHOULD be taken from Disease Targeted
              (preferred to http://smart.who.int/icvp/ValueSet/DiseaseTargeted)
              TypeCodeableConcept
              Is Modifierfalse
              Summaryfalse
              LabelDisease or agent targeted
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              158. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x]
              Definition

              Nominal position in a series.

              ShortDose number within series
              Comments

              The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).

              Control1..1
              TypeChoice of: positiveInt, string
              [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Must Support TypesNo must-support rules about the choice of types/profiles
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              160. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x].id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              162. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x].extension
              Definition

              An Extension

              ShortExtension
              Control1..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Immunization.protocolApplied.doseNumber[x].extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 164. Immunization.protocolApplied:protocolAppliedAuthority.doseNumber[x].extension:doseNumberCodeableConcept
                Slice NamedoseNumberCodeableConcept
                Definition

                doseNumber

                ShortExtension
                Control1..1
                TypeExtension(doseNumberCodeableConcept) (Extension Type: CodeableConcept)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                166. Immunization.protocolApplied:protocolAppliedAuthority.seriesDoses[x]
                Definition

                The recommended number of doses to achieve immunity.

                ShortRecommended number of doses for immunity
                Comments

                The use of an integer is preferred if known. A string should only be used in cases where an integer is not available (such as when documenting a recurring booster dose).

                Control0..1
                TypeChoice of: positiveInt, string
                [x] NoteSeeChoice of Data Typesfor further information about how to use [x]
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))